SZUSTER system for Waterworks
SZUSTER System Innovative products are a great solution designed for Waterworks.
Ball check valves

1.
Fast service – easy access to valves interior, the possibility of inspection of the inlet pipeline without dismantling the valve. Check out the experience of our client – an American manufacturer of Coriolis flowmeters for whom easy and comfortable access to the interior of the valve significantly reduced the time service.
2.
Quiet operation of the valve as a result of the lack of ball vibration. Reduction of the noise level in a pumping station is described in the case study on the example of municipal sewage pumping station in Szczecin (Poland), where a traditional valve was exchanged to the SZUSTER system ball check valve.
3.
Reduced flow resistance which causing lower energy consumption. Read the article Check valves for sewage pumping stations including fecal matter, which includes a comparison chart of local resistance coefficients of the SZUSTER system ball check valves and traditional valves.
EKON, EKOS columns

1.
Flushing and draning of the pipeline under pressure in any direction owing to the standpipe. Watch the video, which presents EKON aeration and air release and EKOS drain-flushing columns.
2.
Complete safe servicing from the ground level. Read the article Safety and hygiene aspects of the operation of a sewage transportation system, which emphasize the importance of preserving safety rules, especially in the context of the occurrence in sewage systems of the deadly gas, ie. hydrogen sulphide and methane.
3.
Fast assembly and disassembly of the aeration valve and cost reduction enabled by the use of a quickfastening coupling.
4.
The possibility of precisely situating pipeline congestion by mounting the gauge on the standpipe unit.
EDP dry pumping station

1.
Fittings and pumps protection from sudden polluted wastewater discharges of solids through the use of the horizontal pipe retention tank. Watch the video, which presents the EDP dry pumping station operation principle and construction.
2.
Safe and hygienic operation by placing the technological part in the dry chamber and the possibility of cutting off the system and service the pump units in hygienic conditions. Read the article Safety and hygiene aspects of the operation of a sewage transportation system, which compares classic wet pumping stations with dry pumping stations and presents pictures of both of them after several years of operation.
3.
The possibility of installation in close proximity with residential buildings or outbuildings. By reducing the formation of odors EDP dry pumping station can be located in heavily urbanized areas.
4.
Limiting the dead retention space to a minimum and thereby minimizing the occurence of odors.
EPP pneumatic pumping stations

1.
Refresh pumped sewage and prevent putrefying during transport, as well as periodic aeration and/or entire emptying of the pressing pipeline using compressed air.
2.
Enable safe and hygienic operation by placing a technological part in the dry chamber. Watch the video, which presents the EPP pneumatic pumping station operation principle and construction.
3.
The possibility to adjust the efficiency of the pumping station to the current requirements without replacing any equipment. This is an important feature when at the beginning of agglomeration development we have to deal with several residents of building plots and ultimately there will be several times more.
4.
Pumping sewage with irregular inflows, preventing them from putrefying and odors emitting. This is particularly important in the case of resort towns, where the partition of water depends on the season.